AVer MT300 - Auto Mode (Channel); Camera and Microphone Groups

14
Auto Mode (Channel)
Frame the active talker with voice-tracking functionality by linking AVer cameras with third-party
microphone systems (supported models) from Audio-Technica, Biamp, ClearOne, Nureva, Sennheiser,
Shure and Yamaha.
Third-party microphone systems may require setup in their manufacture software. For details on
settings, please refer to <Supported Microphones>.
Create a profile to save your Auto Mode settings:
 You can rename a profile.
 While you can save Manual Mode and Auto Mode settings in the same profile, only one mode is
applied per use.
 Switch to Auto Mode by clicking the Auto Mode Settings tab.
 A profile is saved and applied automatically when leaving the Profile page.
1. Click the Settings icon on the
main page > Profile > Auto Mode
Settings.
2. Choose a profile from the Profile
drop-down list to save your settings.
Add a Camera and Microphone Group
3. Select a layout from the Select Output
Layout drop-down list for up to 3
cameras.
4. Add up to 25 groups of AVer camera
and microphone pairs in the Add
Device Group dialog box.
5. Your groups will be displayed in Select
group.