17
Auto Mode (Active Position)
Active Position reports active talker positions from supported microphones in the form of X, Y, Z
coordinates to deliver enhanced camera tracking.
Active Position supports:
USB-connected AVer cameras
Shure MXA920 Ceiling Array Microphone
To set up Active Position:
1. Make sure the USB-connected AVer
camera has been paired with a Shure
MXA920 in <Add a Camera and
Microphone Group>.
2. Select a device group in Select group.
A blue frame indicates that it is
selected.
3. Click the Active Position tab. For
first-time setup, calibrate the camera
and microphone as prompted.
Step 1
4. Select the way camera is installed from
the drop-down list and click Next.
To Next Page
Loading...