AVer MT300 - HTTP Requests; TCP Requests

40
HTTP Requests
Function
Request
Pause all groups
http://[account]:[password]@[IP Address]/request=pause
Resume all groups
http://[account]:[password]@[IP Address]/request=resume
Query pause status of all groups
http://[account]:[password]@[IP
Address]/request=queryPauseStatus
Disable all groups
http://[account]:[password]@[IP Address]/request=disableAll
Enable all groups
http://[account]:[password]@[IP Address]/request=enableAll
Disable a specified group
http://[account]:[password]@[IP
Address]/request=disable&group=[Group ID]
Enable a specified group
http://[account]:[password]@[IP
Address]/request=enable&group=[Group ID]
Query status of a specified group
http://[account]:[password]@[IP
Address]/request=queryStatus&group=[Group ID]
Set profile
http://[account]:[password]@[IP Address]/request=
setProfile&profile=[number]
Reboot
http://[account]:[password]@[IP Address]/cgi-bin?OnePush=!
TCP Requests
A TCP command string starts with AVER:[account]:[password]/request=X. X is as HTTP requests
above.
For example, AVER:[account]:[password]/request=pause,
AVER:[account]:[password]/request=resume, and so on.