12. Finally, locate the logo on the microphone to
indicate its orientation. Move the red cross to
the logo in the live view using pan, tilt and
zoom controls.
Depending on the microphone orientation,
the logo corner may be the same as one of
the 3 corners.
13. Click Set. The saved location will appear in the
thumbnail.
14. Click Next after locating 3 corners and the
logo. Or click Reset to relocate all of them.
Step 4
15. Make sure the red cross appears in the center
of the microphone, and click Save.
16. To reconfigure, click Back.
To Next Page
Loading...