35
To add a coverage area for HDL410:
1. Go to Auto Mode Settings > Channel.
2. Click Channel Configure to choose a Pickup
Mode.
Direction: The microphone’s horizontal
angles are divided into 8 equal parts, which
correspond to MT300 channel 1-8.
Coverage: Add a dedicated coverage
area.
3. Select Coverage from the Pickup Mode
drop-down list.
4. Click Coverage Map Setting > Click Add
Coverage.
5. Add a coverage area by dragging it.
You can add up to 8 coverage areas per
microphone.
When coverage areas overlap, the
microphone will default to the area with the
smaller number.
To Next Page
Loading...