Chapter 1 Introduction
3
• Screen freeze/unfreeze
• Full-screen underscan/overscan (underscan up to 1024 x 768)
• Wide-range picture width and height adjustment
• Horizontal/vertical picture positioning
• Horizontal/vertical screen panning
• TV brightness control
• Supports Composite/S/RGB video output
• Auto-Save
Specifications
Input Signal: VGA, RGB or MAC
Horizontal frequency : 24KHz - 65KHz
Vertical frequency : 50Hz - 100Hz
Output Signal: Composite video, S-video, Computer monitor (PC or MAC)
pass-thru output, SCART RGB video output
Power Supply: 7.5VDC Power Adapter
Dimensions: Base unit : 5.95" x 4.76" x 1.45"
Remote control : 7.24" x 2.2" x 0.65"
Weight: 0.77 lb. (349 grams)
Compliance: FCC Class B
System Requirements
To use the AVerKey3 Plus, you will need :
• IBM
PC or compatibles;
• Any Macintosh supporting standard display modes :
512 x 384 at 24KHz ; 640 x 480 at 31KHz or 35KHz ;
832 x 624 at 48KHz ; up to 1024 x 768 at 60KHz
(MAC systems without the monitor output require a Power-R or Apple
adapter)
NOTE: AVerKey3 Plus should in theory support any computer and display
systems with a vertical display frequency range of 50Hz to 100Hz and
a horizontal display frequency of 24KHz to 65KHz. However, due to
different custom hardware configurations and the wide variety of
connectors used on various systems, we cannot guarantee that
AVerKey3 Plus will function properly.
To Next Page
Loading...