15
2TECHNICAL DATA
2.1 SPECIFICATIONS
ALS
20X
256
2.1.1
Characteristics
1) The maximum usable dispensing speed depends on the label geometry.
2) At a dispensing speed range of 5 m/min to the max. speed
2.1.2
Labels
3) Depending on the dispensing edge width.
2.1.3
Label sensor
2.1.4
Power supply
4) For more information on fuses, see section “Replacing fuses” auf Seite 55.
5) Not accessible for user or service technician.
Dispensing speed
1)
:
ALS 204
ALS 206
ALS 256
max. 40 m/min
max. 30 m/min
max. 50 m/min
Labelling halt precision
2)
at the peeling edge:
±1mm
Speed control: Fixed setting or automatic
speed adaption via the
rotary encoder
Label material: Converted self-adhesive
label material with liner
Internal rewinding yes
Material width (including
backing paper)
3)
:
ALS 204
ALS 206
ALS 256
up to 110 mm
up to 160 mm
up to 160 mm
Label width:
ALS 204
ALS 206
ALS 256
10-110 mm
10-160 mm
10-160 mm
Label length: 5 to 600 mm
Label roll:
Winding direction
Dispenser (outer) Ø:
Rewinder (outer) Ø:
Core (inner) Ø:
inner or outer
up to 300 mm
up to 200 mm
38.1 / 76.2 / 101.6 mm
(1.5/3/4")
Distance to peel edge
L-shape dispensing
edge:
V-shape dispensing
edge:
19 mm
77 mm
Sensor type: Transmission sensor;
NPN/PNP (switchable)
System voltage:
ALS 20X
ALS 256
110 V (AC) at 60 Hz
power frequency (permis-
sible tolerance ±10%)
230 V (AC) at 50 Hz
power frequency (permis-
sible tolerance ±10%)
100-240 V (AC) at
50-60 Hz power frequen-
cy (permissible tolerance
±10%)
Power consumption:
ALS 20X
ALS 256
max. 460 VA
max. 560 VA
Fuses:
ALS 20X
ALS 256
F1, F2: T5AH 250 V
4)
Fuses integrated in the
power supply
5)
2
TECHNICAL DATA
2.1
SPECIFICATIONS
To Next Page
Loading...
