Avery Dennison ALS 206 - Dispensing Speed over Duration V(T)

23
2TECHNICAL DATA
2.3 PERFORMANCE DATA
ALS
20X
256
2.3.3 Dispensing speed over duration v(t)
[8]
A The max. dispensing speed (here 40 m/min) is
reached for the duration of 34 ms.
B Because a shorter label is used, the braking begins
just in the moment of reaching the max. dispensing
speed.
C In this case, the label is even shorter, with the con-
sequence that the max. dispensing speed is not
reached. The braking already begins at a speed of
approx. 36 m/min.
D The same as A), with a lower max. dispensing
speed.