73
4.1 FUNCTION MENU
4.1 FUNCTION MENU
ALS
20X
256
4.1.8
SERVICE DATA menu
If the text shown is longer than the display line
length:
Press the key to move the text to the left.
Press the key to move the text to the
right.
Submenu >MODULE FW VERS.
System version function:
– Shows the firmware version of the labeller
System revision function:
– Shows a consecutive revision number.
– Only for factory-internal purpose.
System date function:
– Shows the date, at which the firmware was
generated.
Bootloader function:
– Shows the bootloader version number.
uMon function:
– Shows the micromonitor version number.
– Only for factory-internal purpose.
Applicator int. function:
– Shows the firmware version of the applicator inter-
face:
V1 – T17 means firmware version 1.17.
Submenu >OPERATION DATA
Service operations function:
– Shows the total number of services that have been
carried out.
–
Increment the counter by using
SERVICE/DIAGNOS. > Service
– Maximum value: 4 Bn.
Tot. mat. length function:
– Displays the total material length that has been fed,
i.e. the "mileage" of the drive roller.
– Maximum value: 4 Bn. metres
Dispencing cycl. function:
– Counter for the number of labels dispensed.
Operation time function:
– Displays the total amount of time the machine has
been switched on
Submenu >POWERSUPPLYDATA
Type function:
– Displays the type of power supply.
Version function:
– Shows the power supply version.
Serial number function:
– Shows the power supply serial number.
PS Temperature function:
– Shows the temperature of the power supply in °C.
Standby+On time function:
– Shows the total time, during which the power supply
was switched on.
Submenu >CPU BOARD DATA
CPU identifier function:
– Displays the identification of the processor used
PCB Revision function:
– Displays the layout revision und part number of the
CPU board
FPGA version function:
– Displays the FPGA version
MAC Address function:
– Displays the MAC address, an address for the board
which is programmed by the manufacturer and can-
not be changed
Serial number function:
– Displays the serial number, which is programmed in
by the board manufacturer
Production date function:
– Displays the date of manufacture of the CPU board
PCB part number function:
– Displays the part number of the board without com-
ponents
Applicator int.
V 1 – T 17
To Next Page
Loading...
