22
3INSTALLATION AND DEINSTALLATION
2.1 UNPACKING, ASSEMBLING AND CONNECTING THE MACHINE
ALS
20X
256
Plugging in the power lead
Ensure that the power switch [22A] is set to "O" (off).
Using the power supply cable provided, connect the
machine to a mains supply socket.
(ALS 20x with splash guard) The power supply cable is
connected by installing the splash guard.
mit Spritzwasserschutz: Das Netzanschlusskabel wird
durch aufsetzen der Abdeckhutze angesteckt.
Before installing the splash guard [23A], ensure
that…
– the machine side power switch [22A] is switched on
(position „I“).
– the power switch at the splash guard [23B] is
switched off (switch doesn´ light).
[22] Power lead (B) plugged in (ALS 20X).
[23] Machine with splash guard.
To Next Page
Loading...
