9
1PLEASE OBSERVE THE FOLLOWING
1.2 SAFETY INSTRUCTIONS
ALS
20X
256
Pay attention to the information
WARNING!
Reliable and efficient operation of the label-
ler is only guaranteed if all necessary infor-
mation is observed!
Carry out the installation, connection,
programming, setting, and repairing of
the machine exclusively in accordance
with the specifications in this manual.
Observe additional safety and warning
notices attached to the labeller.
Observe and adhere to all relevant ordi-
nances and rules in their applicable form.
Examples:
– Work place regulation
– Accident prevention regulations
– Trade union regulations for occupational
safety and health
– Equipment safety law
– Recycling and waste management law
Information must be made available
This service guide
must be made available to all persons who are ent-
rusted with installing, setting up, adjusting, or repai-
ring the labeller.
must be maintained in legible condition.
must be made available to the new owner if the ma-
chine is sold.
Safety and warning notices attached to the labeller
must be kept clean and legible. Missing or damaged
warning plates are to be replaced.
To Next Page
Loading...
