05/09 Rev. 5.02-01 USER MANUAL Setup & Operation
AP4.4 – AP5.4
2
Installing the Printer
Unpacking the printer
1. Remove all loose objects from the packaging.
2. Carefully lift the printer together with the polystyrene cushions out of the
box. Have a second person keep hold of the box while you remove the
printer.
[1] AP5.4 in the original packaging.
3. Remove the polystyrene cushions and plastic wrap from the printer. Hav-
ing someone else help you with this will also make it easier!
4. Place the printer on an even surface.
Carrying the Printer
One person can easily carry the AP4.4/5.4 because it only weighs 14kg.
« To carry the printer, grip the baseplate from the front and rear [2].
[2] When lifting the printer, grip under the baseplate!
Packaging ¯ Please retain the original packaging for later use when transporting the
printer!
CAUTION! - Observe the following to avoid damaging the printer:
« Do not lift the printer by holding the plastic parts on the front and rear.
« Do not grip the front cover when attempting to carry the printer.
To Next Page
Loading...
