05/09 Rev. 5.02-01 USER MANUAL Setup & Operation
AP4.4 – AP5.4
3
Check the Delivery
You are bound to want to start using your new AP4.4/5.4 as soon as possible.
However, we would ask you to take a few minutes to check the following:
« Please ensure that the printer has not been damaged in transit. If the pack-
aging has been dented or torn, please check the contents particularly carefully
for damage that may have resulted from transportation.
« Are the following articles listed included in the box?
[3] The following items are delivered with the AP 4.4/5.4.
• AP4.4/5.4 Printer
• Power supply cable [3A]
The plug for the power supply is different depending on the country of
delivery.
• Data cable [3B]
Centronics IEEE 1284 CA Cable 2m. The cable connector for the printer
is a type C connector!
• Core adapters [3C]
There are two core adapters each for the material rolls with a core internal
diameter of 76.2mm (3”) and 101.4 mm (4”). On delivery, the core adapt-
ers are placed on the printer material dispenser.
• Empty foil core [3D]
Empty foil core for rewinding the thermotransfer foil. On delivery, the back-
ing paper is placed on the foil rewind mandrel.
• Documentation CD [3E]
Contains extensive instructions on using the printer as well as the
Windows driver, printer firmware and service manual.
• Quick reference guide [3F]
Multilingual quick reference guide in print form.
BA
F
E
C
D
G
To Next Page
Loading...
