ETHERNET SETUP GUIDE
Your Monarch® 9416® XL® Thermal Transfer printer has
a factory-installed internal Ethernet print server. Use this
Setup Guide to connect the printer to your network with
the Print Server Utility (provided on the enclosed
CD-ROM).
Information in this document supercedes information in
previous versions. Check our Web site
(www.monarch.com
) for the latest documentation and
release information.
Connecting the Printer
1. Turn off the printer.
2. Connect a network cable from the printer to your
network using the Ethernet port.
Ethernet Port
3. Turn on the printer.
Note: When using the internal Ethernet printer server,
the printer’s parallel port is disabled.
TC9416TTIESG Rev. AC 2/09 ©2007 Avery Dennison Corp. All Rights Reserved.
To Next Page
