What to do if my Avery Dennison Pathfinder 6059 does not print?
If your Avery Dennison printer isn't printing, try the following: ensure you're using a fully charged battery, load the supply correctly, or clean the printhead.
What to do if my Avery Dennison Pathfinder 6059 Printer does not feed?
If your Avery Dennison printer isn't feeding, try these steps: switch to a fully charged battery, ensure the supply cover is completely closed, load the supply correctly, check the platen roller for jammed labels, and make sure the pinch roller is in place.
What to do if my Avery Dennison Pathfinder 6059 partially prints?
If your Avery Dennison Printer partially prints on the supply and fails to respond to the keypad or trigger, try loading the supply correctly, using new supplies if necessary, clearing any supply jams, cleaning the printhead, or switching to a fully charged battery.
What to do if my Avery Dennison Pathfinder 6059 print has voids or is too light?
If the print from your Avery Dennison printer has voids or is too light, try loading the supply correctly, ensuring the supply cover is completely closed, using a fully charged battery, cleaning the printhead, or checking the supply for damage or defects.
Why does the display not turn on and a label with an overstrike pattern prints on my Avery Dennison Printer?
If the display of your Avery Dennison printer doesn't turn on and a label with an overstrike pattern prints, it's because the RFID inlay failed to encode. Make sure the power is on and switch to a fully charged battery.
General| Print Technology | Thermal Transfer |
|---|---|
| Print Resolution | 203 dpi |
| Connectivity | USB, Bluetooth |
| Supported Media Types | Labels, Tags |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Humidity | 10% to 90% non-condensing |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
To Next Page
