Need help?Do you have a question about the Avery Dennison 6059 and is the answer not in the manual?
General| Connectivity | USB, Serial, Ethernet |
|---|---|
| Print Technology | Thermal Transfer |
| Print Resolution | 203 dpi |
| Supported Media Types | Labels, Tags |
| Power Requirements | 100-240VAC, 50-60Hz |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Storage Temperature | -40 to 140°F (-40 to 60°C) |
| Humidity Range | 20% to 85% RH, non-condensing |
Identifies the primary users for whom this manual is intended.
Provides a visual overview of the printer and identifies key user-touchable parts.
Instructions on how to charge the printer's primary 7.4V lithium-ion battery.
Step-by-step guide on how to remove and replace the printer's main battery.
Important safety warnings and guidelines for handling and charging printer batteries.
Explains the function of the touch screen task buttons and the display.
Information on icons displayed on the status bar, such as battery voltage and signal strength.
Instructions for loading supplies when the printer is set to non-peel mode.
Instructions for loading supplies when the printer is set to peel mode.
Information and precautions regarding the use of RFID supplies with the printer.
Guidance on adjusting print contrast for optimal scanning and printhead longevity.
Instructions on how to adjust the print position for labels.
Details on how to select the appropriate sensor type for label media.
Information on how to adjust the brightness of the printer's display backlight.
Explains settings related to power management and battery conservation.
Instructions on how to use the printer's built-in scanner to read bar codes.
Details the laser safety certifications and compliance for the scanner.
Guidelines for properly storing the printer to prevent damage.
Step-by-step instructions for removing jammed supplies from the printer.
Procedure for cleaning the printhead to ensure optimal print quality and prevent damage.
Instructions for cleaning the platen, liner drive, and pinch rollers.
Procedure for cleaning the black mark and on-demand sensors.
How to clean the printer's display screen and scanner window safely.
Solutions for when the printer fails to feed supplies or labels.
Troubleshooting steps for when the printer does not produce any output.
Resolving issues where print is too light or has gaps (voids).
Addressing issues of partial printing and unresponsiveness to controls.
Solutions for when the built-in scanner fails to read bar codes.
Troubleshooting steps for a blank or unresponsive display.
Guidance on understanding and resolving messages related to RFID functionality.
Procedure to check the current software version installed on the printer.
Instructions on how to print various test labels for diagnostics.
Lists common error codes and their corresponding descriptions and solutions.
Guidance on when and how to contact technical support for assistance.
Provides detailed technical specifications including dimensions, printhead, memory, and operating conditions.
Lists available accessories for the 6059 printer, such as chargers, pens, and cables.
To Next Page