Classification: Avery Dennison – Public Specifications & Accessories A-1
SPECIFICATIONS & ACCESSORIES
Specifications
Dimensions:
Width – 3.3” (84 mm)
Length – 9.84” (250 mm)
Height – 7.9” (201 mm)
Weight – 2.0 lbs. (908 g)
Shipping Weight – 5.9 lbs. (2.6 kg)
Printhead:
1.89" (48mm/384 dots) (203 dots per inch)
Printing:
Thermal direct (no ink /ribbon)
Print Speed:
Up to 5" (127 mm) per second
Memory:
2 GB RAM; 4 GB NAND Flash
Battery Type:
7.4V Lithium-Ion
3.6V Lithium-Ion (internal)
Battery Recharge
Time:
1 – 3 hours, depending on the charger used.
Supply Sizes:
Widths: 1.2", 1.5", and 2.0" (30mm, 38mm, and 51mm)
adjustable between 1.2 – 2.0” (30 mm – 51 mm)
Lengths .55" – 8.0" (14mm –203mm)
Peel mode supports .785" (20 mm) or greater lengths.
Non-Peel mode supports .55" (14mm) or greater lengths.
What about RFID peel mode?
Operating
Temperature:
40°F – 110°F (4°C – 43°C)
Humidity
(Operating &
Storage):
5% – 90% non-condensing
♦ The optimal battery storage temperature is 50°F to 73°F (10°C to 23°C), with a maximum of
104°F (40°C). The battery may permanently lose its charge capacity if stored at
temperatures less than 32°F (0°C) or greater than 104°F (40°C). For longest life, the battery
should be stored in a cool, dry place.
♦ The recommended charging temperature is 68°F to 77°F (20°C to 25°C)
♦ Many factors affect your battery’s performance, including the quantity of labels printed,
percentage of black per label, and battery life.
To Next Page
Loading...
