Classification: Avery Dennison – Public Loading Supplies 2-1
LOADING SUPPLIES
The printer uses two types of supplies:
♦ Labels
♦ Tags <- Is this true? What about receipt paper?
The printer has two print modes.
♦ Peel mode removes the backing paper from the supplies as it prints the labels. This mode
allows you to apply the label immediately. It is only for labels. Press the trigger to print a
label or the next label prints automatically when the previous one is removed.
♦ Non-Peel mode does not remove the backing paper. It is for supplies printed in a continuous
strip.
When you load a new roll of supplies, check the battery’s power, if it is low, switch to a fully
charged battery. To load supplies:
1. Turn on the printer.
To Next Page
Loading...
