1-2 Operator's Handbook Classification: Avery Dennison – Public
1 Printhead 5 Label Deflector
2 Supply Holder Tabs 6 Platen Roller (black rubber)
3 Black Mark Sensor 7 Peel Bar (metal)
4 Supply Lock Tab
Charging the Battery
The printer uses a 7.4V lithium-ion battery. The printer also uses a backup battery, which is not
user replaceable. The backup battery keeps the printer’s system settings.
Charge the battery when you receive the printer, even if you do not use the printer right away.
Warning: Do not substitute batteries.
Charge the battery using one of the Monarch® chargers listed in Appendix A,
“Specifications & Accessories
.”
The battery might explode if placed on a different charger.
Charging time is approximately 1 – 3 hours. Refer to the documentation provided with the
chargers for more information.
To Next Page
Loading...
