Avery Dennison 6059 - Getting Started with the 6059 Printer; Intended Audience; Printer Overview and Components

Classification: Avery Dennison – Public Getting Started 1-1
GETTING ST ARTED
The Avery Dennison® Pathfinder® 6059 prints, scans, and collects data. The printer operates
in peel mode or non-peel mode. The printer uses the Android™ 7.1 platform. Your printer may
include the optional RFID module, which the printer uses to encode (program) an RFID (Radio
Frequency Identification) inlay while printing. RFID inlays contain an embedded programmable
microchip and an antenna.
This manual describes how to insert a battery, load supplies, and clean the printer. It also
includes basic troubleshooting information. Your printer may also contain a custom application.
Avery Dennison writes custom applications. Contact your Avery Dennison Representative for
more information.
Audience
This manual is for the operator who scans or enters data to print and apply labels. For
advanced printer configuration information, refer to the System Administrator’s Guide. To
create a format for the printer, refer to the LNT Programmer’s Manual or the Label Design
Utility.
Review the Safety Document included with your printer and the Regulatory information found on
our web site. Keep the box and packaging materials in case the printer ever needs repair.
Printer Overview
User touch parts are yellow.
1 Scanner 5 Battery Release
2 USB Type A host 6 Power Button
3 Mini-B Device 7 Scanner LED
4 Latch Button
1
DRAFT