10 Product Name Manual Type
Unpacking and Installing the Scale
3 Unpacking and Installing the Scale
Unpacking the Scale
1. Remove contents of the shipping container.
2. Inspect the scale for evidence of shipping damage. Immediately report any
damage to the shipper.
Installing the Scale
Mount the scale on a stable, level surface that is free from air currents and vibration.
Be sure the scale platter does not touch any adjacent surfaces.
Cutout Dimensions
To install the scale surface flush with a countertop, use these dimensions to guide your
construction:
7821 Platform Minimum Cutout
Dimensions
Dimensions
14" (35.6cm) W x 14.75" (37.5cm) W x
12.5" (31.7cm) L 13.25" (33.7cm) L
4.1" (10.4cm) Min Ht.
adjustable to 4.6" (11.7cm)
Attaching Velcro
TM
Fasteners (optional)
For the optional remote display, attach Velcro™ fasteners to both the back of the
display and to the surface where the display is to be mounted. To attach the Velcro
fasteners, clean the mounting areas thoroughly and press the Velcro into place. The
adhesive adheres best to a smooth, clean surface.
Velcro is a registered trademark of Velcro USA, Inc.
To Next Page
Loading...
