AVI AVI61006 - DVD Playback Functions; Subtitle and Language Selection; GOTO and Zoom Features

- 17 -
DVD Play Operation
Preparation
1. Install the unit in the kitchen; refer to page 38 for details.
2. After connecting the unit to the AC power, turn on the unit’s power by pressing
the POWER button on the front panel or the remote control.
3. Press the DVD button on the remote control or the SOURCE button on the front
panel to shift to DVD mode.
4. Press the EJECT button on the front panel or the remote control to open the
disc tray.
5. Load the disc with the labeled side facing up.
6. Press the EJECT button again to close the disc tray. The player will
automatically search for the disc and start playback.
DVD disc Playback
Region Code
DVD players and discs are coded by region. These regional codes must match the
played discs. If the codes don’t match, the disc cannot be played. This player’s default
code is region 2.
Play
Press the PLAY button to start playback.

Stop
During playback, press the ŶSTOP button once to stop playback and press the

PLAY button to resume normal playback. Press the ŶSTOP button twice to stop
playback completely.

Pause
Press the

PAUSE button once on remote control or
PLAY/PAUSE button on the
front panel to pause playback. Press the

PLAY button to resume normal playback.
Previous

and Next

Press the  button to go to the next chapter. Press the  button once to return to the
beginning of the current chapter or track; press it twice to go to the previous chapter.
Fast Playback
During playback, press the  button to activate fast backward or forward playback.
During fast playback, press the PLAY button to resume normal playback.