- 18 -
DVD Play Operation
Repeat
Use the REPEAT button repeatedly to repeat a chapter, title or all.
Some discs do not support the repeat function.
A-B
You can temporarily select a section of a DVD that you would like to play repeatedly.
You do this by marking the start and the end of the section using the A-B button.
During playback press the A-B button on the remote control at the beginning of the
segment (point A) you wish to play repeatedly. Press the A-B button again to mark the
end of the segment (point B).
The DVD player will automatically return to point A and repeat playback of the
selected segment (A-B). To resume normal playback, press the A-B button again.
Menu
Normally there is a selecting menu for DVD discs. You can press the MENU button
(under DVD mode) to enter the menu, and use the direction buttons to highlight an
item. Then press the OK button to confirm.
Title & Chapter
Normally there are several titles in a DVD disc, and several chapters (sections) in a
title. You can select any title or chapter quickly by entering the relevant number.
Some discs do not support the function by pressing the number button but the
direction button.
Language (Audio)
There can be up to 8 audio languages on a DVD disc. When you play a multi-
language DVD disc you can use press the AUDIO button on the remote control to
select a language.
z This function is only available for discs that have several audio bit streams
recorded onto it.
To Next Page