EUCON Application Setup Guide10
Surround Panning MC Mix
MC Mix lets you use the encoders to control multichannel pan parameters.
To pan in surround:
1 Press a track SEL key to select a track assigned to a multichannel output path (such as a 5.1 or 7.1 output path).
2 Press the PAN key.
3 Press the CHAN key. Multichannel pan parameters such as Front Left/Right, Front/Rear, divergence, pan, and center percentage
appear in the Soft Encoders.
4 Press the lit PAGE > key to show other available pan parameters.
5 Rotate an encoder to adjust it.
6 To reset a parameter to its default setting, press the encoder for that parameter.
As an alternative to using the encoders, hold SHIFT and press the CHAN/FLIP key to flip pan controls
to the faders. Press
FLIP again to return pan to the encoders.
For more workflows, see the Artist Series Pro Tools Guide.
To Next Page
Loading...
