Chapter 6: Nuendo 23
Tape machine style transport not checked:
Stop The control surface STOP button copies the Nuendo stop button.
Fast Forward/Rewind The FF/RW buttons function as EuCon Momentary/Latch-Switches. If the button is pressed and released
quickly, the switches do NOT latch but behave momentarily, resembling the way these buttons work in the Nuendo GUI. If the
Artist media controller’s FF/RW buttons are held down longer than the latch time set in the Preferences-Setup page, they latch.
Number of knobsets to cache
Nuendo creates knobsets for EQ, Dynamic, Inserts, Aux sends and other functions. A certain number of these knobsets are kept,
or cached, in RAM. For large projects on a large control surface, increasing the number of knobsets in the cache can access them
faster but uses more RAM. It is rare to change this value.
Tips and Shortcuts
Instantiate and Control Any Plugin
Placing plug-ins on a track and controlling them from the Artist media controller can speed up your workflow. Controlling a
plug-in with knobs instead of a mouse not only provides more intuitive, higher resolution control, but can also control multiple
parameters simultaneously. You can dial in settings or automate plug-in control without mousing around or drawing lines in the
arrange window.
1 Select a track on the Artist media controller.
2 Press the INSERTS key (MC Mix) or the INSERTS Knob Top (MC Control).
3 Press both PAGE keys simultaneously to enter Config mode.
4 Push the Knob Top beside the Insert you wish to assign the plug-in to.
5 Push the type for the type of plug-in you wish to instantiate.
6 Press the Knob Top to select the actual plug-in.
7 Press the Knob Top to select the channel format.
8 Press both PAGE keys simultaneously to exit Config mode.
9 Push the Knob Top to open the plug-in.
10 Control plug-in parameters; press the PAGE keys to access more.
11 Press the BACK key to close plug-in.
Toggle Steinberg Plugin Presets
You can see your plug-in presets for proprietary Steinberg plug-ins on the Artist media controller to quickly find your starting
point for effects processing.
1 Select a track on the Artist media controller.
2 Press the INSERTS knobset selector (MC Mix) or the INSERTS Knob Top (MC Control).
3 Open a Steinberg VST 3 plug-in.
4 Press the PAGE keys simultaneously to enter config mode.
Plug-in presets spill across knobs.
5 Select a preset.
6 Press the two PAGE keys simultaneously to exit config mode.
7 Press the BACK key to exit the plug-in.
To Next Page
Loading...
Need help?
General
