Chapter 8: Digital Performer 33
EQ Knobset
The Euphonix EQ knobset allows control of four fully parametric EQ bands. Q and band On/Off are accessible from the knobs.
1 Create Masterworks EQ and exit the INSERTS knobset.
2 Press the EQ key (MC Mix) or EQ Knob Top (MC Control).
You can now use the knobs to control EQ bands.
3 Press the ON button to toggle bands on/off (MC Mix). Touch GAIN on the Touchscreen to toggle bands on/off (MC Control).
4 Press the SELECT key to toggle Freq/Q (MC Mix). Press and hold the Shift key and press GAIN on the Touchscreen to toggle
Freq/Q (MC Control).
5 Press the BACK key to exit.
Assign Inputs
You can change Inputs from the Artist media controller when tracking a session.
1 Select a track on the Artist media controller.
2 Press the INPUTS key (MC Mix) or INPUTS Knob Top (MC Control).
3 Select the track to assign to that input.
To Next Page
Loading...
Need help?
General
