Avid Technology S6L Control Surface Installing

S6L Control Surface RAM Expansion 17
System Clock (Time and Time Zone)
After starting up the system, make sure the system clock time, date and time zone are set appropriately. System Clock is set on the
Options page of the external VENUE software screen.
To set the System Clock:
1 On the external screen, select Options, then select the Misc tab.
2 In the System Clock section, select the Format pop-up menu to set the time format (12 Hour AM/PM or 24 Hour).
3 Select the Edit button in the System Clock section.
4 Select the Zone pop-up to choose the appropriate time zone.
Setting the time zone lets the S6L System Clock display the correct regional time. UTC time reference is not affected.
5 Select each available field and enter the appropriate data to set the time and date.
6 Select Apply.
The new System Clock settings are applied.
Your S6L control surface is now ready for use.
The system clock time can be shown in the Status bar for constant time-of-day display. For more information, see the
VENUE | S6L System Guide.
On touch screens, touch in a field and slide your finger up or down on the screen to increase or decrease the value in the field.

Avid Technology S6L Control Surface Specifications

General

Brand	Avid Technology
Model	S6L Control Surface
Category	Music Mixer
Language	English