Resetting to Factory Default Settings
If the camera no longer functions as expected, you can choose to reset the camera to its factory default settings.
Use the firmware revert button to reset the camera.
Figure 2: The firmware revert button on the rear of the camera
1. Ensure the camera is powered on.
2. Using a straightened paperclip or a similar tool, gently press and hold the firmware revert button.
3. Release the button after three seconds.
CAUTION — Do not apply excessive force. Inserting the tool too far will damage the camera.
Resetting to Factory Default Settings 12
To Next Page
Loading...
Need help?
General
