5
Mounting the Dome Camera
Perform the following steps to mount the dome camera to the ceiling:
1. Use the hole template to cut a 144 mm (5.5”) hole in a ceiling panel.
2. Insert the dome camera into the hole, and pull the cables through the dome
camera’s cable entry hole.
3. Tighten the two clamping screws until the dome camera is secured to the
ceiling.
NOTE: Over-tightening the clamping screws may cause damage to the ceiling or in-
ceiling mount.
Caution — The ceiling material must be able to sustain a minimum of 0.6 kg
(1.2 lbs).
Caution — This camera is designed for indoor use only.
To Next Page
Loading...
