7
• (Recommended) Avigilon Camera Installation Tool software application.
• Camera's web browser interface: http://
<camera IP address>/
• ARP/Ping method. For more information, see Setting the IP Address
through the ARP/Ping Method.
• Network Video Management software application (for example, Avigilon
Control Center).
NOTE: Use the default username (
admin) and the default password (admin) to
access the camera.
Accessing the Live Video Stream
The camera's live video stream can be viewed using one of the following methods:
• (Recommended) Avigilon Camera Installation Tool software application.
• Camera's web browser interface: http://
<camera IP address>/.
• Network Video Management software application (for example, Avigilon
Control Center).
NOTE: Use the default username (
admin) and the default password (admin) to
access the camera.
Aiming the Dome Camera
1. Loosen the pan and tilt lock screws on the camera.
2. Turn the lens to the desired direction by panning and tilting the lens.
3. Once satisfied, tighten the pan and tilt lock screws to secure the dome
camera’s position.
4. Rotate the azimuth control ring to set the image to the correct angle.
5. In the Avigilon Camera Installation Tool, adjust the camera’s Image and
Display settings to achieve the desired zoom position.
Removing the Dome Cover
Remove the dome cover by loosening the 2 tamper-proof screws that fix the cover to the
base. The tamper resistant key included with the dome camera can be used to loosen
the screws.
NOTE: Be careful not to scratch the dome bubble.
To Next Page
Loading...
