8
Focusing the Dome Camera
NOTE: Ensure this procedure is performed after the dome cover is installed, so the focus
shift caused by the dome bubble’s refraction can be accomodated.
• In the Avigilon Camera Installation Tool, use the camera’s Image and
Display settings to focus the camera lens.
a. Click the Auto Focus button to focus the lens.
b. If the desired focus was not achieved, use the focus near and far
buttons to adjust the focus.
For More Information
Additional information about setting up and using the camera is available in the following
guides:
• Avigilon Camera Installation Tool User Guide
• Avigilon Control Center Client User Guide
• Avigilon High Definition H.264 IP Camera User Guide
The manuals are available on the Avigilon website:
http://avigilon.com/support/manuals/.
Caution — Do not attempt to adjust the focus and zoom on the camera itself or
the camera lens may become damaged
To Next Page
Loading...
