Accessing the Camera Web Interface
After the camera or encoder has been installed, you need the device’s IP address to access the web interface.
The IP address can be found in one of the following places:
l Avigilon™ Control Center Client: open the device Setup tab to see the details of the selected camera or
encoder.
l Avigilon™ Camera Installation Tool: click the Connect to Camera button to see the details of the
connected camera or encoder.
Once you have the IP address, complete the following procedure to access the web interface:
NOTE: The web browser must be configured to accept cookies or the camera web interface will not function
correctly.
1. On a computer with internet access, enter the device’s IP address into a web browser:
http://<camera IP address>/
For example: http://192.168.1.40/
2. You will automatically be prompted to enter your username and password to access the device.
The default username is admin, and the default password is admin. It is recommended that you change
the default password after your first login. For more information, see Editing Users and Passwords on
page18.
NOTE: You can only change the device password in the web interface. The password cannot be changed in the
network video management software.
2 Accessing the Camera Web Interface
To Next Page
Loading...
