Overview
Front View
1. Reset button
Use this button to physically restart the recorder or perform a factory reset.
2. Status LED
Provides information about daily operations. For more information, see LEDIndicators on page20.
Rear View
1. Corporate network uplink port
Accepts a 1GbE Ethernet connection to the general network to allow users access to the web
interface and connected camera video.
2. Camera network uplink port
Accepts a 1GbE Ethernet connection to the cameras that are connected to the PoE switch
component. Can be used to link to other PoE switches and cameras.
Overview 2
To Next Page
Loading...
