3. PoE switch component
Connect cameras to the 10/100 speed PoE switch component to power the cameras and record
video.
4. Power connector
Accepts power to the recorder.
5.
I/O connector
Provides connections to external input/output devices. For more information, see Connecting to
External Devices on page19.
System Requirements
Administrative settings for the appliance are managed through a web interface, accessed from any
Windows, Mac or mobile device using any of the following web browsers:
l Mozilla Firefox browser version 3.6 or later
l Google Chrome browser 8.0 or later
l Microsoft Edge browser 25 or later
l Safari 5.0 or later
l Chrome on Android 2.2 or later
l Safari on Apple iOS 5 or later.
l Windows Internet Explorer browser version 7.0 or later
Note: Your web browser must be configured to accept cookies or the web interface will not
function correctly.
Supported Network Configurations
Note: The Camera Uplink Port does not support dynamically switching DHCP servers.
Network
Connections
Camera Web
Interface
Access
Supported IP Configurations
Corporate LAN
Uplink
Camera LAN
Uplink
Notes
Corporate
LAN Uplink
only
No Static or DHCP
assigned
Unconnected
(leave as DHCP)
Camera LAN Uplink and
connected cameras will use
Zeroconf IP addresses.
System Requirements 3
To Next Page
Loading...
