settings, assign a hot spare and remotely monitor the system health. For more information about the features
in the Server Administrator, see the Help system provided in the software.
Replacing Hard Drives
Guidelines
When replacing hard drives, observe the following general guidelines:
l
If only one drive is used, install the drive in the drive bay with the lowest device number. For example:
WARNING — Opening or removing the system cover while the system is powered on may expose you
to a risk of electric shock.
CAUTION — Do not operate the system without the cover for a duration exceeding five minutes.
Operating the system without the system cover can result in component damage.
CAUTION — To ensure proper operation and cooling, all bays in the system and system fans must be
always populated with a component or a blank.
Replacing Front Hard Drives
1. Locate the failed hard drive at the front of the recorder.
2. Press the release button on the front left of the hard drive.
3. When the handle is released, pull the hard drive out of the recorder.
4. Remove the four screws from the side of the hard drive carrier.
5. Lift the failed hard drive out of the carrier.
Replacing Hard Drives 12
To Next Page
Loading...