Avigilon NVR5-VAL-6TB - LED Indicators; Diagnostic Indicators

LED Indicators
The following tables describe what the LEDs on the Network Video Recorder indicate.
Diagnostic Indicators
The diagnostic indicators on the front panel highlight system issues during system startup.
Note: The diagnostic indicators only light-up when the recorder is powered.
LED Indicator Description
System health and
System ID
l
Steady blue — The system is powered on and healthy. System health mode is
active.
l
Blinking blue — System identification mode is active.
l
Steady amber — The system is in fail-safe mode.
Note: If the system health indicates a degraded or critical state,
contact Avigilon Technical Support for assistance.
l
Blinking amber — The system is experiencing a fault. Check the System Event
Log.
l
For more information, see System Health and Identification Modes on page17.
Hard drive
l
Steady amber — The hard drive is experiencing an error. Check the System
Event Log.
Temperature
l
Steady amber — A thermal error has occurred.
Possible errors include:
o
Temperature out of range
o
Fan failure
Check that the fans are functioning correctly and the air vents are not blocked.
LED Indicators 14