LED Indicator Description
Electrical
l
Steady amber — An electrical error has occurred.
Possible errors include:
o
Voltage out of range
o
Failed power supply
o
Voltage regulator
Check the power status indicator to confirm if it is an issue with the power
supply, and reset the power supply unit, if the error persists.
Memory
l
Steady amber — A memory error has occurred.
Check the System Event Log and reset the memory module, if the error
persists.
PCIe
l
Steady amber — A PCIe card error has occurred.
Restart the system, upgrade the device firmware and reinstall the card, if the
error persists.
iDRAC Direct LED Indicators
The iDRAC Direct LED indicates if the iDRAC port is connected to a laptop or desktop computer.
Figure 4: (1) The iDRAC Direct LED indicator
LED Indicator Description
Off
The device is unplugged from the port.
Green for 2 seconds
The device is connected to the port.
Flashing green — on for 2 seconds and
off for 2 seconds
The device is recognized by the port.
Power Status Indicators
The power button on the front lights up when power is on.
Additional information about the power supply is provided by the power status indicator on the power
supplies at the back. The following table describes what the LEDs indicate:
iDRAC Direct LED Indicators 15
To Next Page
Loading...