Configure the Operating System
Configure the preloaded Window 10 or Windows Server 2019 operating system.
Logging into Windows 10 for the First Time
After the recorder starts, you will need to configure the Windows operating system for the first time.
1. The MICROSOFT SOFTWARE LICENSE TERMS and AVIGILON CONTROL CENTER™ SOFTWARE END
USER LICENSE AGREEMENT are displayed. Review the terms and click Accept.
2. Select Join a local Active Directory domain.
Note: This prompt appears only if an Active Directory is present on the network. See the
Windows Help and Support files for more information.
3. Enter a user name for the Windows administrator account.
4. Enter a password and password hint for the Windows administrator account and click Next.
Note: Remember the Windows Administrator password. If the Windows Administrator
credentials are lost, you may need to reinstall the operating system again. It is highly
recommended to create a second Administrator user as a backup.
5. You are logged in to the Windows environment. The Avigilon Control Center Admin Tool and the ACC
Client automatically start up.
Note: If you are performing operating system recovery, the ACC Client does not automatically
start up. For more information about running the local ACC installer, see Operating System
Recovery By Avigilon Recovery Partition on page9.
Proceed to activate the license for the Avigilon Control Center software on your Network Video Recorder.
Configure the Operating System 5
To Next Page
Loading...