Figure 5: (1) The power status indicator.
LED Indicator Description
Off
Power is not connected.
Green
Power is supplied.
Network Link Status Indicators
When the recorder is connected to the network, the recorder’s connection status LEDs above the Ethernet
port display the recorder’s connection status to the network. The following table describes what the LEDs
indicate:
Figure 6: (1) Link LED. (2) Connection activity LED.
LED Indicator Description
Off
The recorder is not connected to a network.
Link LED — green
Connection Activity LED — blinking green
The recorder is connected to a network at the
maximum port speed.
Link LED — amber
Connection Activity LED — blinking green
The recorder is connected to a network at less than
the maximum port speed.
Link LED — green
Connection Activity LED — off
The recorder is connected to a network at the
maximum port speed and data is not being sent or
received.
Link LED — amber
Connection Activity LED — off
The recorder is connected to a network at less than
the maximum port speed and data is not being sent
or received.
Hard Drive RAID Status Indicators
Each hard drive has its own set of LED indicators to show its activity and status.
Network Link Status Indicators 16
To Next Page
Loading...