4.1.6 Entering a list of operator names
Using this function you can manage a list of operator names.
The list appears in operation mode charge/discharge.
Click on ExtrasSettingsPersons.
Clicking New opens an input window into which you can enter the
name of a new tester.
Return to “Tester” with OK.
Clicking Delete deletes the blue-highlighted operator name.
Clicking Edit opens an input window in which you can edit the
blue-highlighted tester name.
Return to “Tester” with OK.
Clicking Current Operator selects the blue-highlighted operator name
(or clicking the desired operator name).
Clicking Responsible Operator selects the blue-highlighted tester name
(or clicking the desired operator name).
4.1.7 Switch off
The MCS 120 has no on/off switch.
With the button, see fig. 2-10, only the power modules are switched off.
The MCS 120 enters Idle, Sleep mode.
To disconnect the MCS 120 from the power grid press the red button (Power
module off) and disconnect the power cable from the wall outlet.
To Next Page
Loading...
Need help?
General
