1.2 EC Declaration of Conformity/CE mark
The manufacturer hereby declares (fig 1-1) that the MCS is in conformity with the
regulations of the following EC directives, including all the relevant modifications
2014/30/EU Council Directive on the approximation of the laws of the
Member
States relating to electromagnetic compatibility
2014/35/EU Council Directive on the approximation of the laws of the
Member
States related to electrical equipment designed for use within
certain voltage limits
2011/65/EU Directive on the restriction of the use of certain hazardous
Substances in electrical and electronic equipment
The following standard conformities are available at the MCS:
SAFETY:
EN 61010-1 Safety requirements for electrical equipment
IEC 61010-1 for measurement, control, and laboratory use –
UL 61010-1 Part 1: General requirements
CAN/CSA-C22.2 No. 61010-1-12
EN 61010-2-30 Safety requirements for electrical equipment
IEC 61010-2-30 for measurement, control, and laboratory use.
UL 61010-2-30 Particular requirements for testing and measuring circuits
CAN/CSA-C22.2 No. 61010-2-30
UL 201 Standard for Garage Equipment
UL 60950-1 Information Technology Equipment
EMV / EMC:
EN 61326-1 Electrical equipment for measurement, control and
IEC 61326-1 laboratory use – EMC requirements – Part 1: General
requirements
FCC Part-15 Subpart-B Part 15—Radio Frequency Devices Subpart B—
Unintentional Radiators
RoHS
EN 50581 Technical documentation for the assessment of
electrical and electronic products with respect to
the restriction of hazardous substances
To Next Page
Loading...
