IMPORTANT SAFETY INSTRUCTIONS
1. Read all instructions.
2. Care must be taken as burns can occur from touching hot parts.
3. Do not operate equipment with a damaged cord or if the
equipment has been dropped or damaged - until it has been
examined by a qualified serviceman.
4. Do not let cord hang over edge of table, bench or counter or
come in contact with hot manifolds or moving fan blades.
5. If an extension cord is necessary, a cord with a current rating
equal to or more than that of the equipment should be used.
Cords rated for less current than the equipment may overheat.
Care should be taken to arrange the cord so that it will not be
tripped over or pulled.
6. Always unplug equipment from electrical outlet when not in use.
Never use the cord to pull the plug from the outlet. Grasp plug
and pull to disconnect.
7. Let equipment cool completely before putting away. Loop cord
loosely around equipment when storing.
8. To reduce the risk of fire, do not operate equipment in the vicinity
of open containers of flammable liquids (gasoline).
9. Adequate ventilation should be provided when working on
operating internal combustion engines.
10. Keep hair, loose clothing, fingers, and all parts of body away
from moving parts.
11. To reduce the risk of electric shock, do not use on wet surfaces
or expose to rain.
12. Use only as described in the manual. Use only manufacturer´s
recommended accessories.
13. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only
have impact resistant lenses, they are NOT safety glasses.
SAVE THESE INSTRUCTIONS
To Next Page
Loading...
Need help?
General
