1 General
1.1 General Notes
The Module Conditioning System MCS 120, here after named MCS 120, is able
to charge and discharge single cell modules of high voltage batteries from E-cars
and hybrid cars.
To guarantee an overall equal load of all cell modules on a HV-battery, the new
cell module has to be charged / discharged to meet this load of the whole battery.
The conditioned „balanced“ cell module replaces the defect cell module.
MCS 120 is technically identical to MCS (Module Conditioning System).
Differences exist only in the appearance of the imprints (front plate and type plate)
and in the design of the user interface.
The MCS 120 is designed to use in car shops which have to do HV battery repairs.
To use this device you must have a special qualification. See below.
Please follow the regulation valid to your country!
Read this operating manual and follow especially the safety hints!
To Next Page
Loading...
