Switching the Wireless Radio Network On and Off by Timer
FRITZ!Box 3390 83
Your guest’s wireless LAN device can use the Internet connec-
tion of the FRITZ!Box, but has no access to your home net-
work. The guest device does not have access to the home net-
work. For more information, see the Online Help.
12.3 Switching the Wireless Radio Network On and Off by Timer
You can switch the wireless radio network of the FRITZ!Box
automatically according to a timer. This function is called
“Night Service”. It reduces the power consumption of the
FRITZ!Box by completely turning off the wireless LANmodule.
The FRITZ!Box night service also affects any other FRITZ!Box
products connected in the network (the FRITZ!WLAN Repeat-
er, for instance): the wireless transmission of these devices is
also switched on and off according to the settings in the
FRITZ!Box.
1. Open the FRITZ!Box user interface (see page 29).
2. Open the “WLAN > Schedule” menu.
3. Enable the timer for the wireless LAN radio network.
4. Configure the settings for night service:
– With the options “Switch WLAN off daily” and
“Switch WLAN off according to schedule” you define
the intervals for switching.
– You can also select the option “The radio network
cannot be switched off until no more wireless devices
are active”.
5. Click “Apply” to save your settings.
Now FRITZ!Box night service is enabled and configured.
For more information on settings, see also the Online Help.
To Next Page
Loading...
Need help?
General
