AVM FRITZ!WLAN Repeater N/G User Manual

FRITZ!WLAN Repeater N/G 20
The WLAN Connection Cannot Be Established
6.3 The WLAN Connection Cannot Be Established
Check the TCP/IP properties. See the documentation of your ac-
cess point for more information.
Possible Cause
The devices are not bound to TCP/IP.
Remedy
Check the network connection of the network adapter in the de-
vice in question. See the documentation of your access point for
more information.
Possible Cause
A firewall is running on the devices.
Remedy
Configure the firewall to allow access to the network.
The WLAN connection between the FRITZ!WLAN Repeater and
the access point cannot be established.
Possible Cause
The FRITZ!WLAN Repeater is located beyond the range of the ac-
cess point.
Remedy
Connect the FRITZ!WLAN Repeater at another location and re-
start it.
Possible Cause
The automatic connection with the access point via WPS failed
(see page 11).
Remedy
Restart the WPS procedure.
Possible Cause
WPS is disabled on the access point.
Remedy
Install the latest firmware on your WLAN access point and then
enable the WPS function in the user interface of your WLAN ac-
cess point.
Possible Cause

AVM FRITZ!WLAN Repeater N/G Specifications

General

Brand	AVM
Model	FRITZ!WLAN Repeater N/G
Category	Repeater
Language	English