To Next Page

To Previous Page

Starting Operation

FRITZ!WLAN Repeater N/G 9

3 Starting Operation

Plugging in and Connecting the FRITZ!WLAN Repeater

This chapter contains instructions on the following topics:

 connecting the FRITZ!WLAN Repeater to the electricity grid

 the display of the FRITZ!WLAN Repeater

 connecting the FRITZ!WLAN Repeater with an access point

3.1 Connecting to Electrical Power

Connect the FRITZ!WLAN Repeater to an electrical outlet.

The FRITZ!WLAN Repeater provides for optimum extension

of your wireless network when it is positioned halfway be-

tween your access point and the devices for which the

wireless network is to be extended.

Connecting the FRITZ!WLAN Repeater to the electricity grid

3.2 The Display of the FRITZ!WLAN Repeater

The FRITZ!WLAN Repeater has a touch-sensitive screen

that can be used to configure the basic settings of the de-

vice. The settings are opened using the three integrated

touch points, which are enabled depending on the func-

tion displayed.

Note the additional information in the section “Security

and Handling” on page 6.

Questions and Answers:

Need help?

Do you have a question about the AVM FRITZ!WLAN Repeater N/G and is the answer not in the manual?

AVM FRITZ!WLAN Repeater N/G Specifications

General