13
As soon as you connect the FRITZ!WLAN USB Stick N to
your computer, the security settings of your WLAN are im-
plemented in the FRITZ!WLAN control software and then
deleted from the Stick. The AVM Stick & Surf logo appears
and a WLAN connection to your FRITZ!Box is established
automatically.
If you are using a FRITZ!Box WLAN without a USB port or a
device from a third-party manufacturer as a WLAN access
point, you can still use WPS (Wi-Fi Protected Setup) or en-
ter the network key manually to establish a secure WLAN
connection.
For more information, see the section “WPS (Wi-Fi Protect-
ed Setup)” from page 35“WPS (Wi-Fi Protected Setup)”
from page 35 and the Help on the FRITZ!WLAN control soft-
ware, which is available as soon as your FRITZ!WLAN USB
Stick N has been installed.
To Next Page
Loading...
Need help?
General
