AVM FRITZ!WLAN USB Stick N 2.4 User Manual

47
6. On the “General” tab, enable the options “Obtain an
IP address automatically” and “Obtain DNS server
address automatically”.
Properties of the Internet protocol (TCP/IP)
7. Confirm your selection by clicking “OK”.
If necessary, repeat steps 5 through 7 for the “Inter-
net Protocol Version 6 (TCP/IPv6)” as well.
The computer now receives an IP address from the WLAN
access point.
For WLAN products of the AVM FRITZ!Box family, automatic
IP address assignment (DHCP) is enabled in the factory
settings.

AVM FRITZ!WLAN USB Stick N 2.4 Specifications

General

Maximum data transfer rate	150 Mbit/s
Connectivity technology	Wireless