12
Installing
3Installing
Installing FRITZ!WLAN USB Stick
The FRITZ!WLAN USB Stick can be installed in the operating systems
Windows Vista (32-bit and 64-bit edition), Windows XP (32-bit and 64-
bit edition) and Windows 2000.
Please install the current Microsoft Service Packs using
Microsoft Windows Update and use a USB 2.0 port for op-
timum performance of your FRITZ!WLAN USB Stick.
You can change the display of menus and folders in most
operating systems. The following instructions are based
on the standard installation of each operating system.
If you have a FRITZ!Box WLAN with USB host function, first
use Stick & Surf (see “AVM Stick & Surf Technology” on
page 11) to transmit the WLAN security settings from your
FRITZ!Box WLAN to your computer.
3.1 Installation in Windows Vista 32-bit Edition
Administrator rights are required to install the
FRITZ!WLAN USB Stick in Windows Vista! Over the course
of installation Windows will request the rights required for
installation. Answer every inquiry by clicking “Continue”
in the dialog.
In order to install the FRITZ!WLAN USB Stick, perform the
following steps:
1. Switch on the WLAN device you wish to connect to.
2. Switch on your computer.
3. Insert the FRITZ!WLAN USB Stick into the USB port on
your computer.
Windows detects the FRITZ!WLAN USB Stick automat-
ically. This process may take some time.
4. In the “FRITZ!WLAN USB Stick selfinstall” dialog,
click the “AVM FRITZ!WLAN USB Stick Installation”
entry.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
