AVM FRITZ!WLAN USB Stick Installation, Configuration And Operation

Removing the FRITZ!WLAN USB Stick
45
8 Removing the FRITZ!WLAN USB Stick
Removing Software and Program Entries
The instructions for removing the FRITZ!WLAN USB Stick are valid for all
operating systems. The FRITZ!WLAN USB Stick driver software and the
FRITZ!WLAN control software are removed at the same time.
Proceed as follows:
1. Insert the FRITZ!WLAN USB Stick CD.
2. Run the setup.exe file.
For the operation systems Windows Vista 64-bit Edition
and Windows XP 64-bit Edition, the required setup.exe file
is located in the WINDOWS_7_VISTA_XP_x64 folder on the
CD.
3. Click “Continue” in the following window.
4. Select the “Removal” option.
The FRITZ!WLAN USB Stick will be removed.
5. Click “Finish” to complete the process of uninstalling
the software.

AVM FRITZ!WLAN USB Stick Specifications

General

Wi-Fi	Yes
Wi-Fi band	Single-band (2.4 GHz)
Data link protocols	IEEE 802.11b, IEEE 802.11g, IEEE 802.11g++
Security algorithms	WPA, WPA2
Maximum data transfer rate	125 Mbit/s
Dimensions (WxDxH)	132 x 138 x 35 mm
Compliance industry standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11i
Supported data transfer rates	11 Mbit/s, 54 Mbit/s, 125 Mbit/s
Compatible operating systems	Windows Vista x64 Edition, Windows Vista, XP Professional x64 Edition, Windows XP/2000
Connectivity technology	Wireless
Component for	PC/Laptop

Weight and Dimensions

Weight	125 g